Compact II - Has a "T" shaped white plastic handle that is pumped straight up and down. Intake water is connected behind (rear) the pump and has a plastic flip lever on the right side of the pump control intake water.

PH II - Has an aluminum lever action handle with a white plastic grip and a round plastic turn handle which reads open-close or flush-dry on it.

PHE II - Can be used electrically or manually. Has a motor and gear box which drives a PHII manual pump with a plastic connecting arm which connects the gear box to the pump.

Crown Head - Has a large motor/pump unit mounted under the bowl covered by a plastic shroud. There are 3 basic series of crown heads and they are identified by a label or brass nameplate on the motor, these are:

Centrifugal (CL): Currently in production.
Standard (STD): No longer in production.
Deep Draft (DD): No longer in production.

Crown Head II - Has a large motor and macerator mounted under the bowl and is concealed by a curved plastic tapered cover. Intake water is delivered by a remote pump or solenoid valve.

Atlantes A5 - Basically the same as the "A" series but uses a plastic handle to activate the system which has a regular flush and water saver select position lever.

Atlantes A6 - Basically the same as the "A5" series except it has no flush handle or select lever. A wall mounted touch pad switch panel with various operational modes is used to activate the system.

Compact: Has a round black knob that is pumped straight up and down. Intake water is connected to a fitting in the front of the pump and has a small stainless steel flip lever to control intake water.

Cricket - Has a large ball-shaped white plastic knob at the end of a telescopic handle that is pumped back and forth.

Limited parts are available.

PH: Has an aluminum lever action handle with a white plastic grip and a round chrome plated knob in front of the pump which controls intake water. This model has not been in production for over 15 years.

Limited parts are available.

PHE - Can be used electrically or manually. Has a motor and gear box which drives a manual PH model pump with a metal arm which connects the gear box to the pump. This model has not been in production for over 15 years.

Limited parts are available.

Crown Head Standard & Deep Draft Series - Has a large motor/pump unit mounted under the bowl covered by a plastic shroud. There are 3 basic series of crown heads, two of which have been discontinued. They are identified by a label or brass nameplate on the motor:

Standard (STD)
Deep Draft (DD)

Atlantes "A" Series: This is an all ceramic-one piece bowl which contains an integral operating macerator mechanism. Intake water is delivered by remote or integral means and can use seawater or onboard pressurized water. A chrome handle on the left side of the bowl activates the system.

All parts remain available.