Page 5 - Raritan Hold-N-Treat Electroscan EST System L372v0717

IMPORTANT: Read all instructions before
proceeding with installation. Tank Assembly
Hold n’ Treat System instructions describe in-
stallation of the complete system . For specific
instructions regarding installation of Elec-
tro Scan components refer to the Electro Scan
manual.

WARNING: Not certified for use in areas
requiring ignition protection. INSTALLATION

Location

• Install on a flat and level surface.
• Mounting surface must support weight of unit
when filled with water (221 lbs (100kg)).
• Mounting area must be well ventilated
• Temperatures must not exceed 120° F(49 C).
0
• Must have access for maintenance
TIP: Mount where macerator pump
and treatment system are accessible for
maintenance

Electro Scan Control Unit

Mounting Tank Assembly

1. Secure Tank Assembly to deck using 3/8”
Bolts or Screws. Note: type of fasteners will
depend on the deck material, thickness and
access.

Mounting Control Units

Important
• The Control Units must be mounted near
the Tank Assembly dictated by their respec-
tive wiring cable lengths.
Electro Scan Control Unit Cable Length
2' (61cm)
• Locate in a dry area.
• Locate in an accessible area

1. Secure to wall with proper fasteners using
the mounting holes provided.

L372 0717jlc 5
5